Saturday, November 21, 2015

HARLEY- DAVIDSON FLHRC 105th Anniversary Road King Classic (2008) pictures -0-


HD-Harley FLHRC 105th Anniversary Road King Classic (2008) Pictures, Review and Spesification.
- The Anniversary Edition of the 2008 Harley Road King Classic adds special two-tone paint and trim -

Harley Davidson FLHRC 105th Anniversary Road King Classic (2008)

HARLEY DAVIDSON Models >

Click Thumbnail to download (size 1600 x 1200 pixels)



General information

Model: Harley-Davidson FLHRC 105th Anniversary Road King Classic 2008
Category: Cruiser

ENGINE
Type 1584 cc, air cooled, v-twin, 4-stroke
Bore x stroke (mm) 95.25 mm x 111.25 mm
Compression ratio 9.2:1
Valves SOHC, 2 valves per cylinder
Fuel system Electronic Sequential Port Fuel Injection (ESPFI)
Torque 125.6 Nm (92.6 ft. lbs) @ 3500 rpm
Lubrication system Pressurized, dry-sump
Exhaust Chrome, cross-over exhaust w/ dual mufflers & slash-up End Caps

TRANSMISSION
Clutch 9-plate, wet
Gearbox 6 speed
Ratios 1e 9.312, 2nd 6.421, 3th 4.774, 4th 3.926, 5th 3.279, 6th 2.790
Primary drive 34/46
Final drive Belt, 32/66
Starting system Electronic

CHASSIS
Frame Mild steel, square-section backbone with twin downtubes Swing Arm Mild steel, rectangular tube sections, stamped junctions; MIG welded
Front suspension 41.30 mm telescopic, 116.84 mm travel
Rear suspension Shocks Air-adjustable, 76.20 mm travel
Rake / Trail 26 degrees / 157.48 mm (6.2 inches)

WHEELS
Wheels Chrome, Profile Laced Aluminum
Front wheel 3.00 x 16
Rear wheel 3.00 x 16
Front tyre MT90B16 72H
Back tyre MU85-B16 77H
Front brakes dual 300 mm discs with 4-piston calipers
Rear brakes single 300 mm disc with 4-piston calipers

DIMENSIONS
Overall length 2380 mm (93.7 inches)
Overall width 876.30 mm (34.5 inches)
Overall height 1399.54 mm (55.1 inches)
Seat height 749.3 mm (29.5 inches)
Wheelbase 1612.9 mm (63.5 inches)
Ground clearance 129.5 mm (5.1 inches)
Fuel capacity - reserve 22.7 l (6 gallon US)
Dry weight 334.8 kg (738.1 pounds)



Motorcycle Insurance Informations


Who will provide physical damage insurance coverage for custom built motorcycles?

Nationwide - Custom parts and equipment coverage (up to $30,000), Custom and limited edition bikes and trikes coverage (up to $50,000), Kit and vintage bike coverage (up to $30,000)
(nationwide.com/motorcycle-insurance-coverage.jsp)

GEICO - Motorcycle insurance is available for most types of motorcycles including: sport bikes, cruisers, tour bikes, enduros, scooters, dirt bikes, trikes and some custom bikes.
(geico.com/information/aboutinsurance/motorcycle)

Safeco insures a full spectrum of motorcycles from street cycles, Harley Davidsons, cruisers and touring bikes to dirt bikes and ATVs. If you select custom parts coverage, you will receive up to $3,000 in coverage without any additional cost to you. Coverage is available for up to $10,000 in custom parts and equipment. (safeco.com/personal/motorcycle/coverage-options)

Progressive - Motorcycle coverage - when you purchase Comprehensive or Collision coverage, at least $1,000 of Custom Parts and Equipment (CPE)/Accessory coverage - Custom paint, custom plating or custom exhaust is included in most states. Additional CPE coverage can be purchased to cover equipment, up to $30,000 in value.
(motorcycle.progressive.com/motorcycle-insurance-coverages-custompartsequipment.aspx)
(motorcycle.progressive.com/custom-motorcycle-insurance.aspx)

U.S. Car Insurance Companies >


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.